Bosch Washer Not Spinning

Bosch Washer Not Spinning Properly? This Could Be Why

Alright, picture this: You’ve got a heap of laundry piling up, ready for a good clean. You approach your trusty washer, but you find your Bosch washer not spinning and your clothes are still soaking wet! Before you get frustrated, we’re here to help navigate you through the muddle of troubleshooting to get to the bottom of your Bosch washer’s spinning woes.

How to Fix a Bosch Washer Not Spinning

Don’t throw in the towel just yet, let’s identify possible suspects that could be behind your Bosch washer not spinning.

Machine Imbalance

If your Bosch washer is not spinning, one of the reasons might be that it’s not sitting evenly on the floor. A machine imbalance can hamper the spin cycle’s efficiency and may lead to excessive noise from your washer. This is often fixable by adjusting the machine’s leveling legs until all four rest evenly on the floor. Use a carpenter’s level to check the washer’s balance, and adjust the legs by loosening the lock nuts on each leg and raising or lowering it as necessary.

Uneven Load Distribution

An unevenly distributed load is another common reason for a washer not spinning properly. Large or heavy items, such as blankets or rugs, can restrict the drum’s motion if they settle on one side of the washer. The imbalance can affect draining and slow down the spin cycle, resulting in damp clothes after spinning.

If your load seems uneven, try redistributing the items more evenly in the washer drum and run a second spin cycle. Overloading can also cause a problem with the spin cycle, make sure to keep the load below 2/3.

How do you fix a Bosch washing machine that won't spin

Clogged Drain Pump

How do you fix a Bosch washing machine that won’t spin? One reason behind your Bosch washer not spinning issue might be a clogged drain pump. The drain pump removes water from the washer before and during the spin cycle. When it’s blocked, it can interfere with the washer’s ability to spin.

If you find your Bosch washing machine not draining or spinning, this may be the problem. Common signs of a clogged drain pump include the presence of excess water in the drum after a cycle or an unusual humming noise during operation.

To fix it, first, check and clean the filter in the drain pump, which could be the source of the blockage. If that doesn’t help, you may need to clean the drain pump itself out, which is usually a job for a technician.

Incorrect Wash Cycle Setting

Why is my washing machine working but not spinning? If your Bosch washer is not spinning clothes dry, you may need to check your cycle settings. Some cycles, such as Delicate or Hand Wash, use a slower spin speed to prevent damage to fragile fabrics. Always verify your washer settings before starting a cycle to make sure you’ve selected the appropriate one for your wash load.

Clogged Drain Hose

A clogged drain hose could be another reason for your Bosch washer not spinning. The drain hose facilitates the flow of used water out of the machine. When it becomes clogged, the washer can’t efficiently remove the water, inhibiting the spin cycle.

Signs of a clogged drain hose may include slow drainage or leftover water in the drum after a wash. You can attempt to clear the blockage by removing the hose and flushing it with water.

Why is my washing machine working but not spinning

Worn Out Washer Drive Belt

The washer drive belt plays a crucial role in the machine’s operation. It allows the drum to spin using power from the motor. Over time, the drive belt may stretch, loosen or even break, resulting in a Bosch washer not spinning or spinning erratically. If you find your Bosch washing machine clicking not spinning, this may be the issue. If the drive belt seems worn out or damaged, it will need to be replaced.

Faulty Washer Door Lock

For safety reasons, the washer door must be locked for the spin cycle to start. If the door lock is faulty or damaged, it won’t signal the washer to initiate the spin cycle or even start at all. Listen for a distinctive “click” when you close the washer door.

If there’s no clicking sound, inspect the lock for visible damage or a technician can use a multimeter to test its functionality. If damaged or showing no continuity with multimeter testing, the lock will need to be replaced.

Washer Tub Bearing Failure

The tub bearing located in the washer’s outer tub helps the inner tub to spin smoothly. If it’s worn out or broken, you’ll notice your Bosch washer not spinning, often accompanied by a loud grinding or rumbling sound. This is a complex issue that might be best left to the professionals.

Remember, dealing with water and electricity can be dangerous, so if you’re uncertain about performing any steps, it’s best to leave it to the professionals. Our washer and dryer technicians at Advance Appliance Service are always available to help with any Bosch washer repair needs. Our skilled and experienced technicians can diagnose and fix your appliance in no time, ensuring your laundry routine gets back on track quickly!

Now Hiring Customer Service Reps!